Tutorial jewelry set “Garnet” (free pattern, not for sale) by Yuliya Abelovich
This Jewelry Set «Garnet» pattern was developed by Yuliya Abelovich.
Unauthorized copying, distribution, selling and teaching of this tutorial or parts of this tutorial are prohibited.
You are welcome to sell the finished product from the tutorial you have purchased in small amounts (mass production is prohibited).
Please, respect the copyright.
Unauthorized copying, distribution, selling and teaching of this tutorial or parts of this tutorial are prohibited.
You are welcome to sell the finished product from the tutorial you have purchased in small amounts (mass production is prohibited).
Please, respect the copyright.
Material required for bracelet:
• Czech fire polished faceted beads 4 mm – 5 pcs for each 3 cm in bracelet (For example, if bracelet 18 cm, you need (18/3)*5= 30 pcs) - click here
• Pearls 3 mm - 4 pcs for each 3 cm in bracelet
• Arcos par Puca– 6 pcs for each 3 cm in bracelet - click here
• Magatama beads or Czech seed beads 8/0– 2 grams - click here
• Seed beads Toho 15/0 (PF 557 ) (or Czech seed beads 11/0) – 2 gram - click here
• Fireline for bracelet (0.2 m + 0.1 m*long of bracelet). For example, if bracelet 18 cm, you need 0.2 +0.1*18 = 2 m fireline - click here
• Two beading needles – size 12 - click here
• Clasp and two jump rings - click here, click here
• Small pliers for jewelry making
Material required for earrings:
• Czech fire polished faceted beads 4 mm - 10 pcs - click here
• Pearls 3 mm - 8 pcs
• Arcos par Puca 12 pcs click here
• Magatama beads or Czech seed beads – 8 pcs click here
• Seed beads Toho 15/0 (or Czech seed beads 11/0) – 1 gram - click here
• Fireline 6lb 0,75 m for each earring click here
• Ear wires (I use gold plated) - click here
• Czech fire polished faceted beads 4 mm – 5 pcs for each 3 cm in bracelet (For example, if bracelet 18 cm, you need (18/3)*5= 30 pcs) - click here
• Pearls 3 mm - 4 pcs for each 3 cm in bracelet
• Arcos par Puca– 6 pcs for each 3 cm in bracelet - click here
• Magatama beads or Czech seed beads 8/0– 2 grams - click here
• Seed beads Toho 15/0 (PF 557 ) (or Czech seed beads 11/0) – 2 gram - click here
• Fireline for bracelet (0.2 m + 0.1 m*long of bracelet). For example, if bracelet 18 cm, you need 0.2 +0.1*18 = 2 m fireline - click here
• Two beading needles – size 12 - click here
• Clasp and two jump rings - click here, click here
• Small pliers for jewelry making
Material required for earrings:
• Czech fire polished faceted beads 4 mm - 10 pcs - click here
• Pearls 3 mm - 8 pcs
• Arcos par Puca 12 pcs click here
• Magatama beads or Czech seed beads – 8 pcs click here
• Seed beads Toho 15/0 (or Czech seed beads 11/0) – 1 gram - click here
• Fireline 6lb 0,75 m for each earring click here
• Ear wires (I use gold plated) - click here
1. The first steps for earrings and bracelet are the same. For bracelet follow steps from 2 to 33. For earrings, follow steps 2 - 17, 28 - 31, and 34 - 39. String both needles on the ends of the one thread.
2. Pick up on the right needle 8 toho 15/0.
3. Take on the right needle Arcos, and on the left needle Arcos.
4. The right needle goes through the bottom hole of the left Arcos.
5. After left needle goes through the bottom hole of right Arcos.
6. Take on the right and left needles: toho 15/0, fire polished, toho 15/0.
7. The right needle goes through right Arcos, and left needle through left Arcos. Now align the ends of the thread. You may to move the finished element to the right or left. The two ends of the thread must be the same length.
8. Take on the right needle Arcos, and on the left needle Arcos.
9. Take on the right and left needles: toho 15/0, fire polished, toho 15/0.
10. The right needle goes through right Arcos, and left needle through left Arcos.
11. The right needle goes through the upper hole of left Arcos, and left needle through the upper hole of right Arcos.
12. Take on the left needle toho 15/0, and on the right needle toho 15/0.
13. Tutorial jewelry set “Garnet”
(free pattern, not for sale) by Yuliya Abelovich.
(free pattern, not for sale) by Yuliya Abelovich.
14. Pick up toho 15/0 and fire polished on the right needle. Take on the left needle toho 15/0.
15. The left needle goes needle through fire polished and toho15/0. The right needle goes through left toho 15/0.
16. Pick up one Arcos on two needles.
17. Take on the left needle toho 15/0, and on the right needle toho 15/0. One link is completed.
18. Now repeat steps from 4 to 18. For making the end of bracelet, you may stop and make end of bracelet on the step 8 or 17.
19. If you stop on the step 8 take on the right needle 8 toho 15/0 and follow steps 21-26, 32-33. !!! If you stop weaving bracelet on the step 17, please follow instructions from steps 27-33!!!
20. The left needle goes through 8 toho 15/0.
21. Tutorial jewelry set “Garnet”
(free pattern, not for sale) by Yuliya Abelovich.
(free pattern, not for sale) by Yuliya Abelovich.
22. On the photo the right side is finished. I will explain how to make it with the example of the left side. The left needle goes through left toho 15/0. Take on the left needle 5 toho 15/0, pearl.
23. The left needle go through Arcos, inserts Magatama between two Arcos.
24. Take on the needle pearl, 5 toho 15/0 and go through toho 15/0.
25. Insert toho 15/0, Magatama, toho 15/0 between two Arcos. After repeat steps from 23 to 26. For making the ending, go to the step 32.
26. If you stop weaving bracelet on the step 17, take on the right needle 8 toho 15/0.
27. The left needle goes through 8 toho 15/0. Left and right needles go out through Arcos.
28. Insert Magatamas on the right and left sides of bracelet, between Arcos. Take on the right needle pearl, 5 toho 15/0. Take on the left needle pearl and 5 toho 15/0. The left needle goes out through toho 15/0. The right needle repeats the same action on the right side.
29. Insert toho 15/0, Magatama, toho 15/0 on the right and left sides of the bracelet.
30. Take on the right and left needles 5 toho 15/0, pearls. Go out through toho 15/0.
31. Spend both needles on weaving. The ends of the threads should be tied into knots in bead weaving. After pass them through the weaving, tie once, and hide the ends of the threads in the weaving, cut off the ends.
32. With pliers unplug the rings and attach clasp with the rings.
33. For making earrings (after step 31) the right needle goes through left external side of the earring, and left through the right side.
34. Go out through toho 15/0 in a front of pearls. Take on the left needle 4 toho beads 15/0 and on the right needle 4 toho beads 15/0.
35. Go out through left and right Magatamas. Take on the left needle 3 toho 15/0, and on the right needle 3 toho 15/0.
36. The right needle makes a small circle – cap for earring. Go out through fifth toho 15/0, and take on the needle 4 toho 15/0.
37. Close the circle, the needle goes through 2 toho 15/0. Reinsert circle once.
38. The left needle goes through beadweaving. Hide the ends of the thread in the weaving, tie them twice, and after hide the ends again and cut them off. One earring is ready.
Leave a comment