Photo Tutorial Bracelet «DARK GREEN» with DiscDuo and RounDuo glass beads (free)
«DARK GREEN» bracelet pattern was developed by Yuliya Abelovich.
Unauthorized copying, distribution, selling and teaching of this tutorial or parts of this tutorial are prohibited.
You are welcome to sell the finished product from the tutorial you have purchased in small amounts (mass production is prohibited).
Please, respect the copyright.
Unauthorized copying, distribution, selling and teaching of this tutorial or parts of this tutorial are prohibited.
You are welcome to sell the finished product from the tutorial you have purchased in small amounts (mass production is prohibited).
Please, respect the copyright.
The length of one link of bracelet is 0.75 cm. You can make any length by adding or reducing the number of links.
Materials required:
1. DiscDuo beads 6*4 mm (color Zinc iris) – 2 pcs for each link in bracelet - click here
2. RounDuo 5 mm (Dark green metallic) – 1 pcs for each link in bracelet minus 1 pcs - click here
3. Pearls Swarovski 3 mm (Scarabaeus green) – 2 pcs for each link in bracelet minus 2 pcs.
4. Pearls Swarovski 3 mm (cream) – 1 pcs for each link in bracelet minus 1 pcs.
5. Seed beads miyuki 15/0 (#452) – 2 grams - click here
6. Fireline 6 lb for bracelet (You need two pieces – each size 0.3 m + 0.12*long of bracelet) For example, if bracelet 16.5 cm, you need two pieces, each long 0.3 + 0.12*16.5 = 2.28 m.
7. Two beading needles – size 12.
8. Bracelet clasp and two jump rings for clasp.
9. Small pliers for jewelry making.
2. RounDuo 5 mm (Dark green metallic) – 1 pcs for each link in bracelet minus 1 pcs - click here
3. Pearls Swarovski 3 mm (Scarabaeus green) – 2 pcs for each link in bracelet minus 2 pcs.
4. Pearls Swarovski 3 mm (cream) – 1 pcs for each link in bracelet minus 1 pcs.
5. Seed beads miyuki 15/0 (#452) – 2 grams - click here
6. Fireline 6 lb for bracelet (You need two pieces – each size 0.3 m + 0.12*long of bracelet) For example, if bracelet 16.5 cm, you need two pieces, each long 0.3 + 0.12*16.5 = 2.28 m.
7. Two beading needles – size 12.
8. Bracelet clasp and two jump rings for clasp.
9. Small pliers for jewelry making.
1. String both needles on the ends of the first thread.
2. Take on the left needle DiscDuo, 5 seed beads 15/0, DiscDuo.
3. The right needle goes through the upper hole of DiscDuo, inserts RounDuo.
4. The left needle goes through the beads, as shown in the picture. You need to align the thread now, so that two ends of the thread become the same length.
5. Take on the right needle Pearl 3 mm, DiscDuo and go out through the upper hole of RounDuo.
6. Take on the upper needle DiscDuo, take on the lower needle Pearl 3 mm.
7. The left needle goes through beads, as shown on the picture.
8. Take on the right needle 3 seed beads 15/0, go through the upper hole of DiscDuo, insert Rounduo.
9. Take on the left needle 3 seed beads 15/0 and go out through the beads, as shown on the picture. Now you need to repeat steps from 5 to 9 for making long of the bracelet, that you need.
10. When you complete, after step 8 take on the right needle 3 seed beads 15/0 and go out through the upper hole of the right DiscDuo. Take on the left needle 3 seed beads 15/0 and go out through upper hole of the left DiscDuo. Take on the right needle 5 seed beads 15/0.
11. The right needle goes through DiscDuo.
12. The left needle goes through 5 seed beads and through DiscDuo. Right and left needles go out through the beads. Spend both needles on the weaving. The ends of the thread can be tied into knots in bead weaving. After this you may pass them through the weaving, tie one more time, and hide the ends of the thread in the weaving, cut off the ends.
13. Put on two needles on the ends of the next thread. Left needle goes through DiscDuo, 5 seed beads 15/0 and through DiscDuo. You need to align the thread now, so that two ends of the thread become the same length.
14. The right needle goes through 3 seed beads and through Pearl on the right side. The left needle goes through 3 seed beads 15/0 and Pearl on the left side.
15. Take on the right needle 6 seed beads 15/0, Pearl, 2 seed bead 15/0 and go through the upper hole of the second RounDuo, as shown on the picture.
16. Take on the left needle 6 seed beads 15/0 and go through Pearl.
17. After step 16 take on the needle (the upper needle) 1 seed bead 15/0 and go out through RounDuo.
18. The right needle goes through DiscDuo, as shown on the picture.
19. The right needle goes through Pearl.
20. The left needle repeat actions from steps 18-19, but on the left side of the bracelet. Repeat inserting beads, as steps 15-20 show all the bracelet long.
21. When you complete, after two last Pearls, take on the right needle 3 seed beads 15/0 and take on the left needle 3 seed beads 15/0.
22. The right needle goes through DiscDuo, and after that goes through 5 seed beads and next DiscDuo.
23. The left needle also goes through DiscDuo, and after that goes through 5 seed beads and next DiscDuo.
24. The right needle goes through 3 seed beads 15/0 and Pearl on the right side. After Pearl take on the right needle 3 seed beads 15/0 and go out through 3 seed beads 15/0 and Pearl, as shown in the picture.
25. Take on the right needle 3 seed beads 15/0 and go out through 3 seed beads 15/0 and Pearl, as shown on the picture. Repeat inserting beads, as step 25 shows all the right side long. After that, insert beads as steps 24-25 show on the left side of the bracelet.
26. When you complete, right and left needles go out through the beads. Spend both needles in the weaving. The ends of the thread can be tied into knots in the bead weaving. After that you may pass them through the weaving, tie one more time, and hide the ends of the thread in the weaving, cut off the ends.
27. With pliers unplug the rings (rings open with a sideways movement, as you see on the photo), and attach the clasp with the ring.
Unauthorized copying, distribution, selling and teaching of this tutorial or parts of this tutorial are prohibited.
You are welcome to sell the finished product from the tutorial in small amounts.
Please, respect the copyright.
Leave a comment